Armacost Lighting LED Lighting Bundle with Dimmable Driver and Connectors

Armacost Lighting 840600 60 watt Dimmable Driver for LED Lighting, with Removable AC Cord, WhiteArmacost lighting 60-watt dimmable LED driver provides outstanding LED dimming performance and architectural-quality brightness control. Although virtually all dimmers will work with this dimmable LED driver, Armacost Lighting recommends Lutron CFL and Leviton illumatech universal dimmers because of their low end dimming range adjustment. Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance. When a dimmer is set to full brightness, LED driver deliver full brightness – there is no loss of top-end light output. Direct wire. Driver has full safety shut off protection in case of lighting overload, open circuit, short circuit, over-temperature, or other fault, automatic restart after the fault has been corrected this is a listed class 2 power unit for safety and has class II AC inputs, fully isolated case, no ground wire is required. Indoor/outdoor, etc. Listed for use in dry and damp locations. To work properly, your LED lighting must operate on 12-volt dc power and be able to be dimmed. This driver works well with all 12V dc LED tape lighting. For other types of LED lighting contact the manufacturer to confirm you lighting is dimmable and it operates on 12-volt dc power.Armacost Lighting SureLock 560724 White LED Tape Light Wire Lead Connector – 5 Pack. 560724Armacost Lighting SureLock White LED Tape Light Wire Lead Connectors allow you to easily connect RibbonFlex Pro White LED tape light strips together or connect LED strips to low voltage 12-volt power wires. Easy to use, no soldering, tight, secure connections.

• Includes (1) 60-watt dimmable LED driver that provides smooth, flicker-free dimming for 12V LED lighting with overload protection (product 1).
• Contains (5) easy-to-use connectors for extending 8mm wide white LED tape lighting strips (product 2).
• Driver delivers full brightness to LED lighting and works with both 120V AC and low-voltage DC dimmers and controls (product 1).
• Connectors allow connecting LED tape strips together or to 12V power wires without soldering (product 2).